Hire World-Class, High Performing, Vetted Electrical Engineers.
Cut Labor Costs by 70%

• Reviewed all electrical submittals, providing detailed comments and guidance to ensure the successful execution of detailed engineering. Evaluations were conducted in strict accordance with local regulations, standards, and applicable international standards.

• Attended weekly coordination meetings with the EPC contractor and equipment vendors, ensuring alignment on project goals and addressing any emerging issues.

• Conducted site surveys at oil fields to gather critical information necessary for the accurate planning and execution of electrical projects.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing to the overall safety and effectiveness of the projects.

• Contributed to the documentation and application of lessons learned from previous projects to improve future project execution.

Projects Handled/Involved:

• Upgrade of Electrical Substations in Beda Oil Field in Benghazi, Libya (Client: AGOCO - Arabian Gulf Oil Co. Libya).
• Detailed Engineering Phase for New Fiscal Metering System at Amal Field in Amal Oil Field, Libya (Client: Harouge Oil Operations).

• Managed a team of Electrical Engineers and Designers, ensuring effective collaboration and timely delivery of project milestones.

• Ensured that all design drawings produced by the team were fully compliant with client specifications, local authority requirements, industry codes, and standards before submission for client review and approval.

• Conducted site surveys and provided comprehensive reports to support accurate and efficient project execution.

• Performed system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software to ensure the reliability and safety of electrical systems.

• Prepared illumination calculations using COOPER lighting software, ensuring proper lighting design that meets project requirements.

• Actively participated in both internal and external project coordination meetings, ensuring alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), work volume assessments, engineering deliverables, man-hour estimates, and defining the electrical scope of work and demarcation. Participated in internal and external project Kick-Off meetings.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project deadlines.

• Developed individual design plans, material requisitions, and technical bid evaluations (TBE), and contributed to the Design Basis Memorandum.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure they met project specifications.

• Provided technical assistance to QA/QC teams by reviewing Inspection Test Plans (ITP) and method statements, ensuring adherence to quality standards.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP meetings when required, contributing to safety and risk management processes.

• Participated in internal QA audits to ensure compliance with quality management systems.

• Participated in Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) to verify full compliance with contract requirements and ensure system readiness for operation and on-time project delivery.

• Provided technical support to the construction team by responding to technical queries and clarifications, facilitating smooth project execution.

Projects Handled/Involved:

• Engineering, Procurement, Construction, and Management (EPCM) for Sebarok Offshore Expansion Project in Sebarok Offshore (Client: VOPAK).
• EPCM for Bulk Storage Tanks in Pengarang, Malaysia (Client: RAPID).
• Design and Construction of a 3.6 Megawatt Off-Grid Solar Photovoltaic System for SATS Airfreight Terminals 5 and 6, Changi Airport, Singapore (Client: Sembcorp Industries).

• Assisted the Lead Engineer in managing the electrical team, ensuring effective collaboration and task completion.

• Studied client documents, including project proposals and specifications, and raised necessary clarifications to ensure a thorough understanding of project requirements.

• Took responsibility for all electrical scope requirements related to various mechanical packages, ensuring alignment with project objectives.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Attended internal and external project coordination meetings with Mechanical Package Equipment Vendors and Client Representatives to facilitate smooth communication and address any project-related issues.

• Acted as the company’s focal point for electrical engineering matters, liaising with engineering services sub-contractors and vendors to ensure alignment with project goals.

• Prepared detailed Electrical Package Equipment Specifications and Datasheets for Gas Turbines, Diesel and Black Start Generators, MV Motors, VSDS, Switchgears, UPS, and other critical components.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project timelines.

• Prepared individual design plans, material requisitions, and technical bid tabulations (TBT), and contributed to the Design Basis Memorandum.

• Developed the Power Distribution System philosophy to guide the design and implementation of electrical systems.

• Provided technical clarifications for electrical components of various mechanical package equipment, ensuring accurate and efficient communication with all stakeholders.

• Attended Bid Clarification Meetings with bidders, clients, and other disciplines to resolve any uncertainties and ensure a clear understanding of project requirements.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Reviewed and evaluated electrical Vendor Print (VP) documents to ensure compliance with project specifications.

• Responded to client comments on submitted engineering deliverables, incorporating feedback to meet client expectations.

• Participated in HAZOP coordination meetings and internal QA audits to ensure safety and quality compliance.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software.

• Performed illumination calculations using DIALUX software to ensure proper lighting design.

Projects Handled/Involved:

• Conceptual & FEED for North Malay Basin Offshore Platform – Greenfield Project in Malaysia (Client: HESS Exploration).
• EPCM for Malikai TLP (Tension Leg Platform) Project – HULL and Topsides, Greenfield Project in Sabah, Malaysia (Client: Sabah Shell Exploration and Production).

• Reported directly to the Senior Electrical Design Engineer, ensuring alignment with project goals and technical requirements.

• Clearly defined the technical scope of each project by making customer requirements and specifications explicit, ensuring precise execution.

• Prepared and managed detailed engineering and design schedules for assigned work, maintaining project timelines and milestones.

• Executed basic electrical engineering tasks in strict accordance with client requirements, ensuring high-quality deliverables.

• Provided early assessments of the company’s technical capabilities relative to customer expectations. Developed tailored solutions that closely matched client needs while optimizing the company’s existing standard offerings.

• Addressed technical inquiries from customers, Project Office Managers (POM), production teams, and draftsmen by delivering well-reasoned and expert advice.

• Formalized technical data for each job using Computer-Aided Design and Drafting (AutoCAD) software, ensuring accurate and precise designs.

• Reviewed and assessed suppliers’ abilities to comply with project specifications, coordinating closely with the materials section. Ensured thorough compliance by verifying supplier acknowledgments of EPS orders and actively participating in necessary meetings, including those with customers when the Senior Electrical Engineer was unavailable.

• Worked in close collaboration with the mechanical section to ensure cohesive project execution.

• Effectively utilized new tools such as ELECDES, AutoCAD 2000, MM3000 system, ELONET, and ECODIAL design software to enhance design accuracy and efficiency.

• Ensured all electrical design drawings adhered to project specifications, relevant codes, and industry standards.

Projects Handled/Involved:

• Design and Supply of 33kV & 13.8kV MC Set Switchgears for six different SEC-CRB Substations in Riyadh (S/S # 7115, 7113, 7782, 8077, 7845 & 7089) as per SEC-CRB Specifications. (Client: HADANIA CORPORATION / Saudi Electricity Company)

• Design and Supervision of 2000KVA Package Substation (Outdoor Kiosk), 33KV/380VAC, 3Ph., 4W, 60Hz, IEC Standard in Tabuk Garden Village-2B, Phase 1, Tabuk, KSA. (Client: Saudi Electricity Company)

• Construction and Monitoring of Two 132KV Substations (S/S No. 8055 & 8056), and Extension of Substation 8020; Design and Monitoring of AC Distribution Board 220/127VAC, 1000A, 3Ph., 4W, 60Hz, 25KA/1sec., IEC Standard. (Client: Daewoo Arabia Limited / Central Region Branch, KSA)

• Design and Monitoring of ATS (Automatic Transfer Switch), 220VAC, 1200A, 25KA/1sec., 60Hz, NEMA Standard for King Fahad International Airport, Riyadh, Saudi Arabia. (Client: Saudi Aramco)

• Taught core engineering subjects such as:
  • Electrical and electronic circuits
  • Energy conversion
  • Engineering materials
  • Mathematics
  • Physics
• Instructed on professional engineering topics, including electrical system design for buildings.

• Prepared comprehensive electrical design packages, including scope of work, electrical specifications, material take-offs, design calculations, construction drawings, material requisitions, and other necessary deliverables.

• Provided clear instructions to electrical designers and CAD operators, overseeing all related engineering design activities to ensure accuracy and efficiency.

• Prepared detailed material take-off (MTO) lists using Excel, ensuring accurate documentation of materials required for projects.

• Assisted senior engineers in evaluating technical bid documents, contributing to informed decision-making during the procurement process.

• Conducted regular site visits to monitor work progress, ensuring that it aligns with applicable codes, standards, specifications, and the overall design intent of the project.

• Interpreted and reviewed vendor drawings to ensure they meet project requirements and specifications.

• Enhanced expertise by studying industry practices and accumulating knowledge from more experienced colleagues.

• Applied Shell DEP standards and other international standards to all projects, ensuring consistency and compliance.

• Maintained positive relationships with consultants, vendors, and contractors, fostering collaboration and smooth project execution.

• Prepared power distribution system design calculations using Excel, ensuring precise and reliable designs.

• Utilized Philips lighting software to perform accurate lighting design calculations for various projects.

Projects Handled/Involved:

• EPC for Caustic Injection Pump (100HP, 480VAC, 3Ph, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Retail Stations Upgrade at various retail stations in the National Capital Region, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• EPC for Substation No. 21A Upgrade (13.8kV, 4000A, 3Ph, 50kA, 60Hz) at Pandacan Oil Depot, Metro Manila, Philippines. (Client: Pilipinas Shell Petroleum Corporation)

• Collaborated with various disciplines including projects, procurement, main contractors, vendors, and other involved groups to ensure seamless project execution.

• Participated in the review of all electrical engineering deliverables submitted by contractors and consultants, ensuring compliance with project specifications and standards.

• Engaged in weekly coordination meetings with contractors, vendors, and third parties to discuss and clarify interfaces, requests, decisions, approvals, project status, and responses.

•  Provided contractors with essential conceptual documents, including specifications, datasheets, and single-line diagrams during the tender stage.

• Responded to contractors' technical queries, ensuring clear and accurate communication of project requirements.

• Conducted regular site visits to assess work progress, providing comments and oversight to ensure compliance with applicable codes, standards, specifications, and the project’s design intent.

•  Offered electrical support to construction contractors by clarifying technical issues during the construction phase.

• Participated in FAT and SAT to verify full compliance with contract requirements, ensuring system availability to support operations and on-time project delivery.

Projects Handled/Involved:

• Design and Construction of GIS 110 kV Substation for Madina Industrial City, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of GIS 132 kV Substation from Riyadh to Qaseem, Kingdom of Saudi Arabia (Client: SCECO).
• Design and Construction of 15MW Wind Power Plant in Taif, Western Province, Kingdom of Saudi Arabia (Client: SCECO).

• Performed engineering duties with a primary focus on power distribution design, including the preparation of essential electrical deliverables such as calculations and drawings.

• Participated in meetings with the Lead Engineer, clients, and third parties to discuss and clarify project interfaces, requests, decisions, approvals, status updates, and responses.

• Regularly reviewed the scope of work to identify any variations, whether initiated by the client or internally within the team. Secured approval from the Lead or Senior Engineer for any changes affecting the project budget or milestones before implementation.

•  Reviewed technical bid submissions for electrical equipment provided by qualified vendors, ensuring compliance with project requirements.

• Incorporated client-approved resolutions of all comments into the drawings and documents produced, under the guidance of the Senior Electrical Engineer or Lead Engineer.

• Applied the latest international and national standards, codes of practice, and good engineering practices to all work performed, ensuring high-quality and compliant outcomes.

• Conducted regular site visits to monitor work progress, providing feedback to ensure adherence to applicable codes, standards, specifications, and the project’s design intent.

• Conducted system studies, including Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination, using ETAP software to ensure safe and efficient electrical system design.

• Prepared power distribution system design calculations using SIMARIS (Siemens software) and lighting calculations using DIALUX software, ensuring accurate and reliable designs.

Projects Handled/Involved:

• Formula-1 Racetrack Project: EPC of Electrical Substations and External Lighting on Yas Island, Abu Dhabi, UAE (Client: Aldar Real Estate Properties).

• EPC of Power Supply Skid for Artificial Lift Well Project: Managed the power supply for five artificial lift wells in Asab and Shah, Abu Dhabi, UAE (Client: Abu Dhabi Company for Onshore Oil Operations - ADCO).

• Lighting and Power Supply Distribution System Design: Designed the lighting and power distribution system for the Baggage Handling System at Dubai International Airport Terminal 3, Dubai, UAE (Client: Dubai Municipality).

• Lead and manage a team of Electrical Engineers, Electrical Design Engineers, and Electrical Designers to ensure timely and efficient project delivery.
• Facilitate effective communication and collaboration within the team and with other engineering disciplines.Provide technical guidance and mentorship to junior engineers and designers, fostering a culture of continuous improvement.
• Oversee the electrical engineering aspects of multiple projects, ensuring compliance with project specifications, industry standards, and client requirements.
• Develop and manage project schedules, ensuring that all deliverables are completed on time and within budget
• Coordinate with project managers and other discipline leads to align project goals and resources.
• Review and approve electrical design documentation, including single-line diagrams, schematics, and layout drawings.
• Ensure all designs meet safety, reliability, and sustainability standards while optimizing cost and performance.
• Perform technical assessments and provide solutions to complex engineering challenges.
• Implement and enforce quality control procedures for all electrical engineering deliverables.
• Ensure adherence to relevant codes, standards, and regulations (e.g., IEC, NEC).
• Conduct design reviews and audits to ensure the integrity and accuracy of all engineering outputs.
• Interface with clients and stakeholders to understand project requirements and address concerns or changes in scope.
• Prepare and deliver technical presentations and reports to clients, providing clear and concise updates on project status and challenges.
• Allocate resources effectively within the team to meet project demands and optimize productivity.
• Monitor project budgets related to electrical engineering tasks and implement cost-saving strategies where applicable.
• Promote the adoption of new technologies and methodologies in electrical engineering design and execution.
• Lead initiatives to improve the efficiency, quality, and sustainability of electrical engineering practices within the team.
• Ensure that all electrical engineering activities comply with HSE policies and procedures.
• Identify and mitigate potential HSE risks in electrical designs and installatio

• Led the electrical engineering efforts for RFS-080 & RFS-084 projects for the RASGAS client, ensuring successful project execution and delivery.

• Assisted the team leader in managing the daily activities of the electrical engineering group, providing regular progress reports on deliverables, and overseeing a team of Electrical Engineers and Designers.

•  Reviewed client documents, including project proposals and specifications, and raised necessary clarifications to ensure alignment with project requirements.

• Ensured that all design drawings produced by the team were in compliance with client specifications, local authority standards, and industry codes before submission for client review and approval.

• Conducted site surveys and prepared detailed site survey reports to support project planning and execution.

• Performed system studies such as Short Circuit, Load Flow, Motor Starting Analysis, Arc Flash, and Protection Coordination using ETAP software. Prepared illumination calculations using COOPER lighting software.

• Actively participated in both internal and external project coordination meetings, including project Kick-Off meetings, to ensure clear communication and alignment across all stakeholders.

• Assisted the project team during the proposal stage by providing material take-offs (MTO), bills of quantities (BOQ), engineering deliverables, man-hour estimates, electrical scope of work, and demarcation.

• Prepared material requisitions for long-lead electrical items and bulk materials, ensuring timely procurement to meet project schedules.

• Prepared individual design plans, material requisitions, technical bid evaluations (TBE), and contributed to the Design Basis Memorandum. Reviewed and evaluated electrical Vendor Print (VP) documents.

• Coordinated with other disciplines, including Piping, Instrumentation, Civil, and Mechanical, to resolve technical issues related to P&ID, control philosophy, foundation details, and rotating equipment.

• Responded to client comments on submitted engineering deliverables and provided technical assistance to QA/QC by reviewing Inspection Test Plans (ITP) and method statements.

• Demonstrated a strong commitment to health, safety, and environmental responsibility throughout all project phases.

• Participated in HAZOP coordination meetings and internal QA audits to ensure compliance with safety and quality standards.

• Participated in FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) to verify full compliance with contract requirements and ensure system readiness for operation and timely project delivery.

• Provided technical support to the construction team by addressing related queries and clarifications.

• Implemented, monitored, and controlled ISMS (Information Security Management System) as per KENTZ Information Security Manual, reporting any violations to the electrical Group Leader.

Projects Handled/Involved:

• RFS-080: FEED and Detail Engineering for AKG-454, Additional Feeder to DP-LCS058 Gas Metering Facilities, LNG Train 2, Ras Laffan (Client: RASGAS).
• RFS-084: Continuous Enhancement Monitoring System for various stacks located in Train-1, 2, 3, 4, 5, 6, AKG-1 & Utilities, RASGAS Refinery (Client: RASGAS).
• Sidra Medical and Research Center Project: Doha, Qatar (Client: Qatar Petroleum).

• Oversaw, monitored, and reviewed contractor transmittals related to the electrical engineering discipline, including electrical layouts, single-line diagrams, load schedules, system studies, specifications, material requisitions, electrical calculations, and other relevant deliverables. Ensured that all systems were safe to operate, maintainable, and compliant with international codes, standards, and project specifications.

• Assisted contractors in resolving technical issues and problems, providing guidance and expertise to ensure successful project outcomes.

• Evaluated, managed, and reported on electrical issues, including design reviews, risk assessments, and coordination with other departments to address and close out any concerns.

• Coordinated, monitored, and reviewed Technical Bid Evaluations for electrical equipment, ensuring that all proposals met the required codes, standards, and project specifications.

• Acted as an interface between the company’s project team and the Lead Contractor, ensuring effective communication and coordination on detailed engineering design matters.

• Actively participated in internal and external project meetings, including reviews of 3D drawings and HAZOP assessments, contributing expertise to ensure project success.

• Served as the company’s primary point of contact for electrical engineering issues, liaising with the Lead Contractor to address any concerns or challenges.

• Contributed to the documentation of lessons learned and applied relevant insights from previous Aramco projects to improve current and future project outcomes.

Projects Handled/Involved:

• Detailed Engineering of New Jazan Refinery in Jizan Province, Saudi Arabia (Client: Saudi Aramco).

• Lead the design of electrical systems for various projects, ensuring they meet all required standards.
• Create and review electrical diagrams and drawings.
• Choose the right electrical components for projects.
• Oversee the electrical engineering part of multiple projects, ensuring they stay on schedule and within budget.
• Work closely with other engineering teams to ensure smooth integration of electrical systems.
• Communicate with clients, contractors, and suppliers to keep projects on track.
• Guide and support junior engineers and designers.
• Review and ensure the quality of electrical designs.
• Solve technical issues that come up during projects.
• Understand client needs and offer technical solutions.
• Prepare and present reports and project updates to clients.
• Make design adjustments based on client feedback.
• Make sure all designs follow local and international standards.
• Keep up-to-date with changes in industry regulations.
• Assess and manage risks related to electrical safety.
• Introduce new technologies and methods to improve efficiency.
• Stay informed about industry trends and recommend useful new practices.
• Encourage continuous learning and improvement within the team.
• Effectively allocate team resources to maximize productivity.
• Monitor budgets and find ways to save costs without sacrificing quality.
• Ensure all work follows health, safety, and environmental guidelines.
• Identify and address potential safety risks in electrical systems.
• Promote a safety-focused culture in the team.

Oversee electrical work for refinery and petrochemical projects, keeping them on schedule and within goals.
Coordinate with other engineering teams to ensure smooth integration of electrical systems.
Communicate with contractors and vendors to meet project needs.
Review and approve electrical designs, ensuring they meet standards and regulations.
Provide technical guidance to ensure safe and accurate design and installation.
Conduct audits and inspections to maintain safety and quality.
Act as the main contact for electrical engineering issues, updating clients and stakeholders regularly.
Prepare and present reports and technical documents to management and partners.
Resolve any electrical issues raised by stakeholders.
Ensure all electrical work follows local regulations, international standards, and safety protocols.
Conduct risk assessments and implement safety measures to prevent electrical hazards.
Promote safety through regular briefings and training sessions.
Allocate resources effectively to ensure efficient use of manpower and materials.
Monitor budgets and find ways to save costs in electrical tasks.
Implement quality control procedures to ensure high standards in all electrical work.
Visit sites to check that installations match approved designs.
Address any defects or non-conformities in electrical systems.
Promote the use of new technologies and practices to improve project efficiency.
Lead efforts to improve the reliability and performance of electrical systems.
Provide leadership and mentorship to junior engineers and support staff.
Encourage collaboration and continuous improvement within the team.

•  Involved in the preparation of plans for all Electrical Works
• Study, review, & analyze project documents such as plans, specifications, general terms/conditions and addendum.
• Attend Pre-Bid meeting, conduct site inspection and preparation of technical and commercial bid proposals.
• Coordinate and Arranged deliveries, installation, Inspection of Electrical Works to the Client
• Carryout Inspection & Quality Control of Installed Electrical Works in Conformance of Specification and Approved Drawing through Coordination and site verification.
• Issue Site Instruction, Conformance/Non-Conformance Report to the Construction Management.
• Prepare Documentation, Testing & Commissioning Report, Snagging
• As-built Drawing for Turn-Over of the Project

Client / Project Handled / Project Involved:

• NAIA IPT3 International Airport
• Sheraton Marina Hotel
• Hyatt Regency Hotel
• Pioneer Highlands
• Le Meridien Hotel, World Trade Center
• Evercrest Nasugbu Hotel
• Southwoods sports club
• 6811 Ayala Avenue Hotel, Cairo Lemeridien Hotel
• Suzhou Sheraton Hotel, Mactan Shangri-la renovation
• SM Sheraton Hotel
• Juhu Beach Resort India
• JW Marriott Hotel India
• Kenwood Marriot Hotel India.

• Manage the coordination, scheduling and project execution as per Contract.
• Preparation of tender documents, quotations, drawing plans, and material submittals for client submission.
• Preparation and timely approval of below sequence of Project requirements.
  • Confirmation of Client, Contractor
  • Engineers Instructions
  • Project daily/Weekly reports
  • Request for Information
  • Material Approval Submittal
  • Shop Drawing Submittals
  • Site Inspection Request
  • Material inspection Request
  • Technical submittals
  • Method of Statement
  • Design Calculation and Details
  • Operation and Maintenance Manual Submittals
  • Non-conformance notification report
  • Subcontractor – Supplier Approval request
  • Equipment, Material Test report Submittals
  • Accident – Incident Notification Reports
• Prepare reports, and correspondences for proper project assessment.
• Key person in the signing and approval of Final quotation, Tender Submissions, and Procurement of approved
  equipment and materials.
• Attend meetings as the company representative.
• Turnkey project management.

Doha, Qatar/Past Project Handled:

• Qatar Airway’s Catering Co. Sheraton Hotel, Hilton Hotel, Al-Sharq Hotel & SPA, Ritz Carlton, Holiday Villa and SPA,
• Al Khayat Contracting Co. (Emir’sPalace)
• Drake and Skull (Al Rayyan Palace)
• Albandary Eng’g. (P88, P95, P112A & B, P113 B & C, P105, P119, P145, P147, Naval Base, Naval Academy)
• ArabTec Const. (P16 Mshereib Hotel Doha Downtown)
• Harinsa Contracting Co. (Waldorf Astoria Hotel, JW Marriott Hotel)

• In-Charge in the Interpretation of Approved electrical plans for construction in line with the Project BOQ contract for the preparation of actual material take off as needed at the Project Site,
• In-Charge of the proper designation of Staff for everyday work at the site in line with the Approved Project Schedule.
• Coordinate with the Office Store for the timely deliveries of materials, equipment, and electrical Instruments.
• Attend Weekly meeting for Project site status and development.
• Prepare Daily movement Plan and Report for assigned Project to the Management.
• Tender and Projects involved:
  • MV Substation & Transmission Line for Seysun Lagoon 5Mw Solar Farm - Seychelles
  • PAIX Data Center – Nairobi, Kenya
  • Sun Mills Paper Factory – Nairobi, Kenya
  • Mgallery Hotel by Sofitel – Nairobi, Kenya
  • Ojijo Mixed-used Hotel Development – Nairobi, Kenya

• Manage in the execution of electrical work within allotted time, productivity, quality, safety standards, and in accordance with approved specifications and drawings, scope of work are as follow: Supply, installation, Testing and Commissioning of below Items: 
  • Incoming 13.8KV, grid supplied power system.
  • 1000KVA Generator and system auxiliaries.
  • 3 x 1MVA Power Transformer, HV and LVSG system,
  • 120KVA/0,4Kv/3Ph,
  • Inverter Earthing system
  • Grounding system
  • Lightning system
  • Cable ladder and trunking
  • Power panels and emergency systems.
  • Power Cable, wiring and Termination 
  • FDAS, FCCAP, BMS, MCC
  • Data, Telephone, CCTV, Access Control, Security System, Public Address, Parking Control, Structured Cabling System, MDF, and FCC
  • CATV, and Distributed Antenna System
  • Smoke controller system
  • Fire protection systems, sprinklers, FS and TS
  • Stairway pressurization and DPT.
  • Refrigeration, VFT Air-conditioning systems, and Ducting.

• Manage, Plan, implement, and monitor MEPFS works of the project in coordination with Main construction schedule, Project Managers, Construction managers, Specialty Contractors/Suppliers, Local Government Unit, and Service providers
• Conduct regular meetings to update progress, resolve issues and concerns
• Evaluate installation for productivity and safety.
• Technical Supervision
• Review and evaluate the MEP plans and specifications and relate the services to the structural, architectural, and interior design plans.
• Evaluate and resolve discrepancies between MEP, Structural, architectural and ID plans with Project manager and TSG Manager then coordinate with the owners representative for consultants approval.
• Evaluate and monitor the progress of works of MEPFS contractors and suppliers and relates them to the general construction schedule. CAD Drawings, Resolve issues that may cause potential delay.
• Evaluates methodology of installation for safety and productivity.
• Attend and conducts construction coordination meetings and technical meetings.
• Review and issues MEPFS minutes of the meeting agenda. Quality Management
• Ensures timely submission of material, equipment and shop drawings approval.
• Performs QA and QC on all MEPFS works and materials of contractors through regular observation and inspection.
• Recommend issuance of non-conformance notice to QA/QA Dept.
• Witness and evaluate major equipment testing of owner supplied materials and contractors supplied materials.
• Witness and evaluate start-up, testing and commissioning of major equipment. Schedule, Cost and Contracts
• Monitors the MEPFS contractors schedule and critical milestone dates to ensure the timely completion of the projects.
• Advises the Project Managers, Project Management Team, and contractors of any constraints that may be a cause of delay in the completion of the project and recommends appropriate solutions to the problems.
• Evaluate cost proposals and billing of specialty contractor and supplier.
• Recommend value-engineering or cost-saving measures to the Project managers.

• Prepare power requirements for cell sites
• Evaluate power capacity of sites
• Evaluate subcon quotations 

•  Supervise electrical works
• Prepare estimates and requisitions
• Review plans and specifications
• Evaluate subcon billings

• In-charge in the electrical works
• Prepares design, shop drawings and as-built plans
• Prepares materials/equipment take-off and purchase request
• Assist in the preparation of work permit req’ts
• Prepares daily, weekly and monthly work schedule and accomplishment report
• Prepares quotations, reports and estimates
• Ensure conformance to QESH requirements
• Coordinate with other trade regarding execution of work plan
• Supervise the work of subcontractor and check implementation of plans
• Conducts regular toolbox meeting
• Monitors testing and commissioning
• Attends client, staff and subcon coordination meeting

• Supervision of electrical works
• Prepare shop drawings
• Evaluate subcon progress billing
• Prepare estimates and material requisition
• Attend coordination meeting
• Submit progress report
• Inspect delivered electrical materials

•  In-charge in the electrical works
• Prepares design, shop drawings and as-built plans
• Prepares materials/equipment take-off and purchase request
• Assist in the preparation of work permit req’ts
• Prepares daily, weekly and monthly work schedule and accomplishment report
• Prepares quotations, reports and estimates
• Ensure conformance to QESH requirements
• Coordinate with other trade regarding execution of work plan
• Supervise the work of subcontractor and check implementation of plans
• Conducts regular toolbox meeting
• Monitors testing and commissioning
• Attends client, staff and subcon coordination meeting

• Oversee and direct construction projects from conception to completion
• Review the project in-depth to schedule deliverables
• Ensure compliance with building and safety regulations
• Review the work progress and materials flow
• Submit billing and project status report
• Designate and assign tasks to subordinate

• Overall incharge of electrical design and construction
• Review electrical design
• Prepare budgetary cost for project inquiries
• Evaluate cost proposal of subcontractors
• Review the project in-depth
• Designate and assign tasks to subordinates
• Conduct site inspections and attend meetings

• Overall in-charge of construction works

• Check electrical design
• Monitor subcontractor
• Propose revisions
• Prepare cost

• Electrical Design Analysis and Calculations
• Provide Technical evaluations on Waste Water Technology Solutions
• Provide Supervisions for Various Solar Powered Irrigation Projects

Projects Handled

• BNR Upgrade of Various Waste Water and STP Plant (11 Sites)
• Design and Build of Alviera Estate STP Cluster 2 - 9.07MLD

• Review shipyards inquiry and/or purchase order specifications
• Prepare contract offer together with other disciplines.
• Review HVAC Electric Equipment
• Manufacturing drawings
• Review and draw electrical controls and specifications
• Assists sales promotions and other engineering design works

Projects Handled

• Chevron Jansz-Io Compression LNG Project
• ABB/MODEC BM-CC-33 Ehouse

• Office Works
• Request for Quotation
• Purchase Request/Order
• Follow up Delivery from Supplier’s
• TDD (Technical Due Diligence) Works
• Review and align Electrical Design Drawings to ensure compliance with design specifications and guidelines
• Coordinate plans and specifications with other discipline engineers, identifying and clarifying discrepancies.
• Provide onsite support on electrical installations.
• Troubleshoot/find solutions when technical and project conflict arises.
• Work with Electrical Manager(s) to perform cost budget & forecast.
• Manage Electrical Sub-contractors.

• Product Brochures and Data Sheets Evaluation
• Design Electrical Calculations i.e(Load calculations, wire sizing, breaker sizing,short circuit calculations,lux level calculations)
• Design Layouts and Drawings using CAD ( MCC Panel Layouts, Local Panels, Power and Lighting Layouts, Grounding Layouts, Single Line Diagrams)
• Site Supervision and Installations
• Commissioning In Charge
• Shop Drawings, As-Built Drawings
• Client Inspections and Approval Facilitator
• Costs Control
• Material controller

• Short Circuit Calculation Analysis
• Lux Calculation
• Genset Required kVA rating
• Transformer kVa rating
• Capacitor Bank required rating
• Voltage Drop Calculation
• Electrical Design Specification
• Lighting & Power Layout
• Auxillary Layou (FDAs, CCTV, Voice & Data, Etc.,)
• Cable Tray Layout
• Power Receiving & Distribution Layout
• Lighting & Power Schedule of Loads
• Lighting & Power Single Line Diagram
• Panel Layout
• Schedule of Loads
• Single Line Diagram
• Control Wiring Diagram
• Components List
• Request for Quotation
• Purchase Request/Order
• Data Sheets & Brouchures
• Follow up Delivery from Supplier’s
• Review and align Electrical Design Drawings to ensure compliance with design specifications and guidelines
• Coordinate plans and specifications with other discipline engineers, identifying and clarifying discrepancies.
• Provide onsite support on electrical installations.
• Troubleshoot/find solutions when technical and project conflict arises.
• Work with Electrical Manager(s) to perform cost budget & forecast.
• Manage Electrical Sub-contractors.

• Responsible for the overall technical aspects of the assigned property, including Construction Monitoring,
• Preventive Maintenance Programs,
• Daily Operations and Property Enhancement.
• In the absence of Property Manager/Administrator, responsibility will be extended to four major functions i.e
• Operations, Finance, Property Enhancement and Community Development.

• Responsible for the monitoring, operation, repair and maintenance of overhead cranes, motors, auxillary switches, cooling towers, sensors, cooling bed, kick off and all electrically operated machines and equipments to ensure good condition and continous production of rebars and promote safety throughout the whole plant.
• Coordinate to Plant Supervisor regarding the schedule of machine for Preventive Maintenance, ensure parts and materials needed for auxiliary devices are readily available.
• Electrical installation works and preventive maintenance of substation (tightening of bolts and connectors, Thermal scanning transformer, bus bars). Additional Task is given by Supervisor from time to time.

• Maintain, troubleshoot and repair all equipment in End of Line production area including Auto Frame Loader robot sequence programming.
• Also Responsible for the ESD grounding of working tables, machines, and other equipment being used in production.
• Responsible for wiring installation of machines during relocation.

• Responsible for all issues encountered on Singulation Station.
• Create a program used for new product on Singulation Station.
• Responsible for buy-off of machine and new product on Singulation Station. Also Responsible for new product innovation in the department.
• Build and implement Skill Test and training module for technicians that will be assigned to Singulation Station.

• Manage technicians and engineers on repair and troubleshooting.
• Responsible for manpower schedule for Maintenance and Work Order.
• Implement Project Study new machines, projects, or renovations.
• Prepare and manage documents for Engineering Department and enhance old guidelines and procedures existing in the department.

• Design Panel Diagram using Autocad Software
• Design Wiring Diagram “Point to Point” and “Detailed”.
• Modification of P&ID
• Prepare all Instrumentation & Control documents and drawings needed by senior engineers.

• Nansemond Waste Water Control System - New York, USA 
  • Design Control System wiring diagram and Instrument hook-up  diagram. 
• Croton H Control System - New York, USA 
  • Design Control System wiring diagram and Instrument hook-up diagram.

• Develop and Edit PLC and SCADA/HMI programs.
• Commission and Implement project including preparation of all documents for every project.
• Provide any kind of Technical Support on different Industries.

• Diverter and Packaging Upgrade Project for Cracker Line 
  • Install additional conveyor and modify pathway by using diverter system for Cracker Line Rejection System. 
  • Modify packaging parameters to attain good finish product. 
• Wyeth Dryer Monitoring System
  • Install and Modify Product Monitoring for their barcode system. 
• PLC Maintenance 
  • Perform Preventive Maintenance activity to their control system and do backup of their current PLC program. 
  • Modify program base on the end-user preference parameters.

• Act as Instrumentation Design Engineer for some of the projects and Lead Control System Engineer at the same time.
• Manage project deliverables and designate it to respective engineers for their work with accordance to Project timeline. Identify and dictate right control system for each project.
• Design and prepare all Instrumentation Control Systems deliverables such as P&ID, HAZOP Plan, Instrument Hook-up Diagram, Control System Block Diagram,  functional Description, Schematic Diagram, Sequence Logic Diagrams, System Control & Interlocks Schedule, Pneumatics & Hydraulic Control Schematic, System Architecture and other Instrumentation & Control Systems Deliverables.
• Provide troubleshooting assistance to site operation and proper solution.
• In-charge with the development of Automation System for every equipment and solutions

• Blayney Filter Machine Integration - New Crest Mining - Orange County, NSW, Australia 
  • Integrate manufactured Filtration Machine to their existing control system. 
• Filter Machine Integration - Maeden Alumina Mining – Saudi Arabia 
  • Install and Integrate 3 manufactured Filtration Machine to their  existing control system. 
• GE Turbine Skid Module, Controls and Instrumentation  - Clients from Belgium, China, Australia, Malaysia, New Zealand and Middle East Countries. 
  • Install instruments and control system base on clients different Functional Description of the Skid.

• Lead the Instrumentation & Control Group in maintenance of all equipment in the plant.
• Lead the group in troubleshooting, repair and monitoring of all equipment specially those automated related equipment like Motor Controls, Servo motors and drives, VFD, Instruments, PLC, HMI / SCADA, Measuring, Metering and Controlling Devices, Pneumatics / Electro-Pneumatic devices and other similar devices in the process and utilities equipment.
• Responsible on all Instrumentation and Automation projects in the plant.
• Responsible on spare parts management and safety process of the plant. P
• Participate on every HAZOP and HACCP as representative and Team Leader of Instrumentation and Control Team.
• Participate on the review of the P&ID used in the plant for the Process Control and Instrumentation side.
• Responsible for Training and development of technicians in the plant.
• Perform as Factory Leader and help the whole company achieving its Yearly Performance by supporting all WCM targets and KPIs .

• Plant Capacity Expansion Project 
  • Relocate equipment and install additional production lines for the capacity expansion. 
  • Prepare drawing layout of all the equipment and conveyors that will be moved and install based on actual dimensions. 
  • Evaluate designs of the conveyors system. 
  • Evaluate every Control System that will be used in the project based on PFD, P&ID and Functional Description that been prepared before implementation. 
  • Installations includes 2 New RUF Machine, Big Drum Cone Line with Kuka Robot for Packaging, 2 Hardening Tunnel, 10 Ageing Tanks, 1 New Conveyor system for 4 Production Lines and Instrumentation & Controls from Mix Plant to Packaging Area. 
  • Relocation of Flexline Tub Filling Line, Versaline Stick Filling Line, and RUF Tubline Machine including their corresponding conveyor system. 
  • Installation of X-ray Machines, Carton Formers and Check weigher for each conveyor system corresponding to each filling lines need.
• Process Integration for Rocket Jelly Product 
  • Integrate additional Accessory Equipment such as Conveyors, Choco tanks, Steam line, and Conversion kits (End Seal, Fin Seal and Wrapper Folding Box for packaging and Ice Cream Molds). 
  • Assess accessory equipment`s floor layout and install it w/out affecting existing process of the production line. 
• Ice Cream Mix Match Project 
  • Automating the monitoring of the mixes and controlling the pump to reduce Ice Cream Mix waste. 
• Ammonia Plant SCADA and Instrumentation 
  • Installation of New Instruments to the plant. Replacing old/malfunctioned instrument base on functions needed for the automation. 
  • Integration of all equipment in the Ammonia Plant for Monitoring and Minor Controls. 
• Cone and Tub Line Controls Upgrade 
  • Upgrading of Control System and Mechanical Stations of the Ice Cream Filling Line for Cone and Tubs. 
  • Replace and Install New Conveyor System for the Filling lines to the Hardening Tunnel base on the layout that we prepare. 
• Cone Vision System
  • Install Vision System and Integrate it to the Machine`s reject system for cone packaging quality. 
• Mix Plant Control System Upgrade 
  • Upgrade existing Hardware setup for PLC-CPU to Redundancy setup. 
  • Upgrade existing SCADA system and includes additional  instruments and other equipment added to the Mix Plant process.

• Spearhead Automation Projects and act as Project Manager.
• Provide technical support for the clients in SEAA Region.
• Manage all activities of Automation Department and make sure all activities are distributed accordingly.
• Act also as the Business Development for the Philippines. To acquire projects in the Philippines and to create opportunities in terms of Automation.
• Develop partnerships with Automation OEMs and support them on their internal projects.
• We do projects in Different Industries from Manufacturing and Grains Processing. We cater Process and Equipment optimization from Material Handling up to Product Packaging.
• We provide different types of Automation and MES solutions to different Industries according to their need and resources.

• SCADA and Controls Integration - PT Golden Gran Mills, Indonesia 
  • Replace existing Centralized Control System and SCADA of the plant with a new System based on Functional Description. 
  • Install new Control Panels that includes new PLC and VFD for the controls of the conveyors and sifter. 
• Plant Integration System - Golden Bay Grand Terminal, Batangas, Philippines 
  • Integrate new conveyor system that integrating 2 Plant with modification on its safety protocol. 
  • Modify SCADA system base on the additional conveyors added to the plant w/out affecting the interlocks of the process. 
• MCC Installation and VFD Integration - Citigroup, Bangladesh 
  • Replace existing MCC with new VFD installed for the conveyor and sifters. 
  • Modify existing Control System for the variables and parameters need to the new installed VFDs. 
• Waste Water SCADA System - Intermalt, Vietnam 
  • install new Control System for their waste water base on the Functional Description of the end user. 
  • Modify P&ID base on the changes that clients need.

Implement OT Cybersecurity program to the assigned company and provide proper documentation for the said program.

I managed the whole company in the Philippines for Operation and support to other affiliated companies worldwide.

• Preparing quotations from tender documents.
• Going through tender documents to confirm compliance, product selection.
• Generate quotation from price lists.
• Manage tender schedule and going through tender documents to confirm compliance product selection.
• Preparing quotations received from email for live projects.
• Preparing mechanical specification compliance report.
• Generate VSD price lists per specific customer.
• Preparing Project Delivery Sheet Schedule.
• Generate Tender Sheet Schedule for project monitoring purposes.
• Forwarding purchased orders and quotes to customer service sales for processing.
• Teaching newly hired electrical estimators.

• Review the bid documents which include electrical and auxiliary layout plans and material specifications.
• Estimate all the required electrical and auxiliary works of the project then prepare Bill of Quantities which includes labor and material costs.
• Prepare Request for Quotation to be sent to suppliers to determine the price of estimated materials based on design.
• Follow-up and accumulates different suppliers’ quotations for comparison of prices which will determine the best possible price considering budget cost but not suffering quality.
• Also prepare electrical and auxiliary drawing layout plans if there are any changes or modifications in the most recent updated architectural plans.
• Attend site inspections if there is new project for bidding, or for renovations, modifications, demolitions, dismantling and re-installation, etc., of electrical works.
• Supervise electrical sub-contractor for the implementation of the project.
• Perform related duties and responsibilities as assigned

• Review the bid documents which include plans and material specifications of the project required in design.
• Design and estimate Electrical and Auxiliary System which includes Single Line or Riser Diagram, Layout Drawing and estimated material take-off.
• Make an Estimate Sheet Summary and Scope of Works.
• Prepare the estimated material take-off in preparation for the Bill of Quantities that were itemized per system.
• Prepare Request for Quotation to be sent to suppliers to determine the price of estimated materials based on design.
• Follow-up and accumulates different suppliers’ quotations for comparison of prices which will determine the best possible price considering budget cost but not suffering quality.
• Prepare an arch file which compose of technical specs, bid documents, drawings, take-off & estimate sheets, request for quotations, and supplier’s quotation – for record keeping and future reference.
• Prepare bill of quantities and design drawings to be presented to engineering managers for approval of estimated costs which may include construction materials, equipment, devices, and labor costs.
• Attend bid meeting with the client for the coordination of the project.

• Check for compliance the submittal requirements of electrical works’ materials, fixtures, equipment and methodologies prior to delivery of materials. Checks the materials delivered and its workmanship. Reports any deviation or seemed contrary to the plans and specifications as against any accepted engineering standards taking into consideration the interest of the Client in terms of quality, economy and time.
• Prepares, understands and interprets engineering construction plans, cost estimates, specifications and other contract documents for proper implementation.
• Ensure compliance to the requirements through close physical inspection during the execution of the project and installation of equipment and materials by the Contractor. Records and issues corresponding memorandum for non-conforming works to effect appropriate rectification/corrective measures.
• Assist in the preparation of progress reports of electrical works in the project. Prepares necessary correspondence, daily inspection report and punch lists. Maintain records of changes and field notes. Prepare recommendations on approval of progress payments and change orders.
• Perform related duties and responsibilities as assigned

• Directly responsible for the repair & troubleshooting of test equipment.
• Conduct equipment audit.
• Make daily report.
• Help implement projects for the improvement of machine utilization with regards to productivity, quality, and human safety

• Perform operations of Engineering Run units before running actual production.
• Study the status of equipment performance in relation to the product that was being process therein.
• Make documents on how the process flow was done in the product.
• Solve problems encountered during operation.

• Provide lights and electrical power supply for video camera to be used during live coverage speech of his/her Excellency—The President of the Philippines.